Instructions for the Pauldron (Style 1)

pauldron-style01

Number of Pieces: 84 pieces + 6 foam pieces

Estimate Build Time: 2 to 4 Hours

Instruction Videos:

  • 9 Steps
  • Total Run Time = 1 hour 16 minutes

Content of Kit

Make sure you have the items shown in the photos below before you proceed with your sword build. Please email us if you are missing any items. Paint will be included if you purchased the Crafteeo Metallic Paint Kit. You should have two sheets of sheet 1, sheet 2 and sheet 3. You should only have one foam sheet.

PLD01-Sheet01

2X PLD01 Sheet01

PLD01-Sheet02

2X PLD01 Sheet02

PLD01-Sheet03

2X PLD01 Sheet03

PLD01 Foam

PLD01 Foam

Tools and Materials

All tools and materials required for this build should be available at your local art and craft store or large retailer. Although you can substitute Tacky Glue with regular white glue, it is recommended that you use the Tacky Glue for this project since the thicker glue will makes the build significantly faster and Tacky Glue dries much quicker. It is always a good idea to get some scrap newspaper or cardboard sheets to help keep your works area clean during the gluing and painting steps.

To decorate your helmet, we recommend you use water-based acrylic paint for the depth of colors and easy clean-up. However since the helmet is made from cardboard almost any color media, crayons, markers, etc., will work.

Tip #1: Get disposable plastic or paper cups to hold your paint.

Tools and Materials for the Pulsar Helmet Build

pauldron-armor-tools-and-materials

Paint Kit and Disposable Cups

pulsar-helmet-tools-and-materials

Pauldron (Style 1) Build

There are 9 main steps to this build with 40 subtasks. You will need to build both sides, so steps 1 through 4 are for side 1 and steps 5 through 8 are for side 2. Both sets of instructions are essentially the same. If this is your first Crafteeo project or the first time doing this project, we recommend that your view the video instructions twice: once to get a feel for what you will be doing and the second time when you actually build. It is good practice to do a dry fit prior to gluing individual pieces together. This will help you anticipate issues and identify critical alignment features. Take your time and enjoy the build process!

Pauldron

finished-painted-pauldron

Tip #2: Keep several damp, NOT dripping wet, paper towels nearby to wipe off excess glue or paint. This will help you maintain a clean build and clean work area.

Paint

If you purchase the paint kit, the helmet comes in two different color schemes: (1) Gunmetal Metallic with Gold and (2) Sequin Black with Silver. If you want to create your own color scheme, you can use any number of coloring media, e.g. acrylic paint, spray paint, or markers, although, we recommend craft paint. It is inexpensive, water-based for easy clean up and it paints onto the paper very smoothly. After you finish painting, I recommend you let the paint and glue dry overnight before you start using your shield.

Color Guide For the Pauldron

pauldron-paint-guide